We can supply a large selection of pinions with the leaves cut, the arbor roughly turned and male centers but no pivots turned on.
These are available in lengths which will allow shortening to fit most clock plates. The leaves are cut with square bottomed cutters which makes them ideal for restoration work. No hardening or polishing is carried out unless requested.
In most cases the pinion head is at the end of the arbor but this is sufficiently far in to allow some adjustment. The pinions are available with diameters increasing by quarter millimeter steps, and these are cut in 6, 7, & 8, leaves see following chart.
|Outside Diameter in millimeters||3.75mm.||4.00mm.||4.25mm.||4.50mm.||4.75mm.||5.00mm.||5.25mm.||5.50mm.||5.75mm.|
* Available in these sizes later.
|Outside Diameter in millimeters||6.00mm.||6.25mm.||6.50mm||6.75mm.||7.00mm.||7.25mm.||8.00mm.||8.25mm.||8.50mm.||8.75mm.||9.00mm.||9.25mm.|
Price:- 3.00-3.75mm £26.00 each, 4.00-4.75mm 22.50 each, 5.00-8.00mm 20.00 each, 8.25-9.25mm £24.50 each.
These prices are subject to discount for quantities.
Pinion blanks roughed out ready to mill can be supplied, these are 8mm diameter on
the head and approximately 80mm long. These save time when making a clock movement.
Price:- £6 each, 6 for £30.